Strainer

Specification Parameters

Product introduction

The strainer is an indispensable device on the conveying medium pipe. It is usually installed at the inlet end of a pressure reducing valve, a pressure relief valve, a fixed water level valve or other equipment to eliminate impurities in the medium to protect it. Normal use of valves and equipment. When the fluid enters the filter cartridge with a certain size strainer , its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, the removable filter cartridge is taken out, and then reloaded after processing. Yes, therefore, it is extremely convenient to use and maintain. The Y-type strainer produced by our factory can set the mesh number according to different needs of customers. The general water network is 10~20 mesh, the ventilation network is 40~100 mesh, and the oil network is 100~160 mesh (special case) Filters can be made according to user requirements).

Filters are divided according to the installation method: suction strainer

Structure length standard DIN3202-F1

Connection flange standard DIN2531-2545

Pressure temperature grade GB/T12224-2005

Test and inspection standard GB/T13927-2008